MINI-BIKES

     Jig welded from high quality 7/8" O.D. by .083" wall tubing, this Fork & Frame set is designed to accomodate up to and including 17.5" O.D. mounted tires and comes complete with engine mounting plate, front axle holes and rear axle mounting tabs.  No additional welding is required.  Maximum Engine Height of 13-1/2".  Wheelbase - 36".  Handlebar width - 21".

                     ●  Maximum Engine Height of 13-1/2"  ●  Wheelbase - 36"  ●  Handlebar width - 21"  ●

AE3545

AE3548

AE3546

AE8472

AE8515

Seats

       ●  Thick Mounting Base  ●   Dense Foam  ●  Threaded Inserts for Positive Mount  ●  High Quality Covers  ●

AE1632

AE1633

Fenders

                            ●  Plated or Unplated  ●   Cold Rolled Steel  ●  Available in Three Sizes  ●

                            ●  4.2" wide x  14.5" long x 3.75" High  -  Fits 4", 5", 6" Tires

                            ●  4.0" wide x  18.0" long x 4.00" High  -  Fits 8" Tires

                            ●  5.5" wide x  18.0" long x 4.75" High  -  Fits 6", 8" Tires

AE1857

AE1855

AE1830

AE1829

AE1866

AE1865

Foot Pegs

                          ●  Long Mounting Studs  ●   Sturdy Rubber Treads  ●  Fold-Up When Not In Use  ●

AE1739-TT

AE1739

Throttle & Brake Controls

Brake Lever

                                  ●  Split Mounting Collar  ●   Rugged Steel Handle with Classic Ball End  ●

AE1731

AE2371

Throttle Assemblies

     Our economy kit #2359 is almost identical to our premium kit #2352. Both use the same twist grip components, but the economy kits use a vinyl-covered steel conduit without a polyethylene inner liner. If your application does not require the low-friction advantage or the more severe routing capability provided by the premium, slippery, lined Wescon conduit used in our Premium Kit, the #2359 twist grip and conduit throttle assembly provides a quality, cost-saving substitute.

   ●  Deluxe Grip has a Lined Conduit  ●   Economy Grip has an Unlined Conduit  ●  Matching Dummy Grips Included ●

                                                    ●  Fits 7/8" Handle Bars  ●  50" Conduit  ●

AE2352

AE2359

AE2350

AE2349

AE2348

AE2347

Control Cables

AE1751

AE1752

AE1753

Mini-Bike Components

Brake Components

Band Brake Components

AE2251B

AE2255B

AE2254

     4" Drums

            ● For 4" Band Brake ●             ● 2.875" Bolt Circle ●             ● 4 Holes - 5/16" & 3/8" ●

AE2541

4 1/2" Drums

AE2211OD

AE2213OD

Expansion Brake Components

4 1/2" Expansion Brakes

AE2270A

AE2272A

AE2271A

AE2270S

AE2272S

AE2271S

Replacement Parts

AE2260

AE2263

AE2264

AE8235

AE8302

AE8304

AE8510

4 1/2" I.D. Brake Drums

     Flanged drum has 6 holes on a 5-1/4" bolt circle. All are machined either "I.D." for brakes on this page or "O.D." for  4-1/2" brake drums.  All drums have three sets of mounting holes: 3 and 4-hole on a 3.75" diameter bolt circle and a 4-hole to match the mini-hub pattern.

4-1/2" ID or OD Brake Drums/Sprockets

     An Economy Steel Sprocket is riveted to a machined #2213 Drum to provide a strong, reliable unit at very economical prices.  The Sprockets  use #35 chain and are available in either 60 tooth or 72 tooth.

     Single Piece Sprocket Drums are stamped for added precision at economical prices.  These units can be used for direct replacement of the riveted  assemblies.  

  1-Piece Drum/60 tooth Sprocket - 4.5 " ID

AE2217ID

  1-Piece Drum/72 tooth Sprocket - 4.5 " ID

AE2218ID

  1-Piece Drum/60 tooth Sprocket - 4.5 " OD

AE2217OD

  1-Piece Drum/72 tooth Sprocket - 4.5 " OD

AE2218OD

4-1/2" Assemblies with Riveted Hubs

     These machined drums feature the  Mini-Hub, factory riveted to any of our 4-1/2" ID, or 4-1/2" OD drum variations for use on a 1" Live Axle, or a 1-1/4" Live Axle.  Ideal for small, low horsepower vehicles. (set screws and key included).  Sprocket versions are available in 60 tooth or 72 tooth for use with #35 chain.

  Drum/60 T Sprocket - 4.5 " ID - 1" Hub

AE2267ID

  Drum/72 T Sprocket - 4.5 " ID - 1" Hub

AE2268ID

  Drum/60 T Sprocket - 4.5 " OD - 1" Hub

AE2267OD

  Drum/72 T Sprocket - 4.5 " OD - 1" Hub

AE2268OD

  Flanged Drum - 4.5" ID and 1" Hub

AE2266ID

  Flanged Drum -4.5" OD and 1" Hub

AE2266OD

  Flanged Drum - 4.5" ID and 1-1/4" Hub

AE2246ID

  Flanged Drum -4.5" OD and 1-1/4" Hub

AE2246OD

  Drum, No Flange - 4.5" ID and 1" Hub

AE2265ID

  Drum, No Flange - 4.5" OD and 1" Hub

AE2265OD

  Drum, No Flange - 4.5" ID and 1-1/4" Hub

AE2245ID

  Drum, No Flange - 4.5" OD and 1-1/4" Hub

AE2245OD

Chain

     Billet Aluminum

Wheel Hubs

Axles

 Threaded 5/8" Steel Mini Axles

 Threaded 1" Steel Mini Axles

Axle Nuts

Thin Profile with Nylon Insert

1 1/4" Axles

We offer solid axles in a quality aluminum alloy. Strong, but lightweight, all have a true machined surface and 1/4" keyways.

Axle Spacers

  (2) 3/8", (3) 1/2", (1) 3/4", (8) 1"

8" Inch Spun Aluminum Wheels

8"  Wheels with 3 Drive Lugs for use with our Custom Drive Hubs

  8" x 8" - Polished

  8" x 9" - Polished

  8" x 8" - Black Anodize

  8" x 9" - Black Anodize

For more information see Wheel Specifications chart at bottom of page.

  8" Spinner - with 5/8" Precision Ball Bearings

  8" Spinner - with 5/8" Standard Ball Bearings

  8" Spinner - with 3/4" Standard Ball Bearings

  8" Spinner - Wheel Only - No Bearings

  8" Spinner - Inner Half Only

  8" Spinner - Outer Half Only

For more information see Wheel Specifications chart at bottom of page.

  Wheel Only

  With Riveted Brake Drum

  With Riveted Brake Drum Flanged for Sprocket

  With Riveted #35 Sprocket & Drum - 60 tooth

  With Riveted #35 Sprocket & Drum - 72 tooth

  5/8" ID Precision Ball Bearing - 1 3/8" OD

                  (two required per wheel)

Billet Aluminum Wheels

Give Your Custom Mini-Bike or Mini-Chopper The Look You Want With These Wild CNC Machined Styles!

12" Billet Aluminum Wheels

Give your custom Mini Chopper the look you want!

  12" Maltese Cross

  12" Spider Web

  12" Kenda Tire 12.0 x 2.25

  12" Tire Tube 12.0 x 2.25

16" Billet Aluminum Wheels

  16" Alcatraz - Polished

  16" Alcatraz - Black Anodized

  16" Circle

  16" Predator

  16" Pro Star

  16" Ten Spoke

  16" Kenda Tire 16.0 x 1.50

  16" Innova TF-100 Tire 16.0 x 1.50

  16" Tire Tube 16.0 x 1.50

Zytel® is a name trademarked by DuPont for its series of specially engineered nylon resins.
Azusalite Wheels are molded from a glass-reinforced, alpha-crystalline, Nylon 6 resin designed to provide the optimal combination of tensile, impact and flexural strengths.  The resin is further enhanced by carbon black for the best UV protection. The resulting Azusalite Wheels are lightweight, but strong, resilient and durable.

For more information see Wheel Specifications chart at bottom of page.

  Wheel Only - No Bearings

  Wheel - with 5/8" ID Precision Ball Bearings